Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point 사용자 설명서

Before installing the ProSAFE Dual Band Wireless N Access Point WNDAP350, you should 
make sure that your Ethernet network is up and working. You will be connecting the access 
point to the Ethernet network so that computers with 802.11b/g/n or 802.11a/n wireless 
adapters will be able to communicate with computers on the Ethernet network. In order for 
this to work correctly, verify that you have met all of the system requirements, shown on 

Before mounting the WNDAP350 in a high location, first set up and 
test the WNDAP350 to verify wireless network connectivity.



Prepare a computer with an Ethernet adapter. If this computer is already part of your 
network, record its TCP/IP configuration settings. 

Configure the computer with a static IP address of 192.168.0.210 and 255.255.255.0 for the 
Subnet Mask.

Connect an Ethernet cable from the WNDAP350 to the computer. 

Turn on your computer, connect the power adapter to the WNDAP350 and verify the 
following:

The PWR power light goes on. 

The LAN light of the wireless access point is lit when connected to a powered on 
computer.

The WLAN LEDs should be blinking.



Connect to the WNDAP350 by opening your browser and entering http://192.168.1.1

in 

the address field. The WNDAP350 login screen appears (see 

).

Enter admin

 for the user name and password for the password, both in lower case letters.