Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point 사용자 설명서
Basic Installation and Configuration
30
ProSAFE Dual Band Wireless N Access Point WNDAP350
-
Data Rates for Channel Width=20MHz and Guard Interval=long (800ms).
Best, 6.5 Mbps, 13 Mbps, 19.5 Mbps, 26 Mbps, 39 Mbps, 52 Mbps, 58.5 Mbps,
65 Mbps, 13 Mbps, 26 Mbps, 39 Mbps, 52 Mbps, 78 Mbps, 104 Mbps, 117 Mbps,
130 Mbps
Best, 6.5 Mbps, 13 Mbps, 19.5 Mbps, 26 Mbps, 39 Mbps, 52 Mbps, 58.5 Mbps,
65 Mbps, 13 Mbps, 26 Mbps, 39 Mbps, 52 Mbps, 78 Mbps, 104 Mbps, 117 Mbps,
130 Mbps
-
Data Rates for Channel Width=40MHz and Guard Interval=short. Best,
15 Mbps, 30 Mbps, 45 Mbps, 60 Mbps, 90 Mbps, 120 Mbps, 135 Mbps,
150 Mbps, 30 Mbps, 60 Mbps, 90 Mbps, 120 Mbps, 180 Mbps, 240 Mbps,
270 Mbps, 300 Mbps
15 Mbps, 30 Mbps, 45 Mbps, 60 Mbps, 90 Mbps, 120 Mbps, 135 Mbps,
150 Mbps, 30 Mbps, 60 Mbps, 90 Mbps, 120 Mbps, 180 Mbps, 240 Mbps,
270 Mbps, 300 Mbps
-
Data Rates for Channel Width=40MHz and Guard Interval=long. Best,
13.5 Mbps, 27 Mbps, 40.5 Mbps, 54 Mbps, 81 Mbps, 108Mbps, 121.5 Mbps,
135 Mbps, 27 Mbps, 54 Mbps, 81 Mbps, 108Mbps, 162 Mbps, 216 Mbps,
243 Mbps, 270 Mbps
13.5 Mbps, 27 Mbps, 40.5 Mbps, 54 Mbps, 81 Mbps, 108Mbps, 121.5 Mbps,
135 Mbps, 27 Mbps, 54 Mbps, 81 Mbps, 108Mbps, 162 Mbps, 216 Mbps,
243 Mbps, 270 Mbps
•
Channel Width. From the pull-down menu, select the desired channel width. To
maximize performance, select high throughput channel width. The default is Dynamic
20/40 MHz.
maximize performance, select high throughput channel width. The default is Dynamic
20/40 MHz.
•
Guard Interval. From the pull-down menu, select the desired guard interval. The
guard interval protects from interference from other transmissions. The default is
guard interval protects from interference from other transmissions. The default is
Auto.
The data rates for different Channel Width and Guard Interval combinations are given
above:
above:
•
Output Power. From the pull-down menu, select the transmit power of the access
point. The options are Full, Half, Quarter, Eighth, and Minimum. Decrease the
transmit power if two or more APs are close together and use the same channel
frequency. The default is Full. (The transmit power may vary depending on the local
regulatory regulations.
point. The options are Full, Half, Quarter, Eighth, and Minimum. Decrease the
transmit power if two or more APs are close together and use the same channel
frequency. The default is Full. (The transmit power may vary depending on the local
regulatory regulations.
3.
Click Apply to save your 802.11a/n wireless settings.
Configuring Basic QoS Settings
Wi-Fi Multimedia Support (WMM). Wireless Multimedia (WMM) is a subset of the 802.11e
standard. WMM allows wireless traffic to have a range of priorities, depending on the type of
data.
standard. WMM allows wireless traffic to have a range of priorities, depending on the type of
data.
Time-dependent information, such as video or audio, has a higher priority than normal traffic.
For WMM to function correctly, Wireless clients must also support WMM.
For WMM to function correctly, Wireless clients must also support WMM.
To configure basic wireless QoS settings for 11b/bg/ng and 11a/na:
1.
Under the Configuration tab, select Wireless from the main menu, select Basic, and
then select QoS Settings from the left panel. The QoS Settings screen displays, as
shown in
then select QoS Settings from the left panel. The QoS Settings screen displays, as
shown in
Figure 14, Basic QoS settings screen
.