Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point 사용자 설명서

For a new wireless network, print or copy this form and fill in the configuration parameters. 
For an existing wireless network, the person who set up or is responsible for the network will 
be able to provide this information. Be sure to set the Regulatory Domain correctly as the first 
step.

SSID. The Service Set Identification (SSID) identifies the wireless local area network. 
NETGEAR_11g is the default WNDAP350 SSID. However, you may customize it by 
using up to 32 alphanumeric characters. Write your customized SSID on the line below. 

___________________________________ 

Note: The SSID in the wireless access point is the SSID you configure 
in the wireless adapter card. All wireless nodes in the same network 
must be configured with the same SSID: 

Authentication. 

Circle one: Open System or Shared Key. (Choose Shared Key for more security.)

Note: If you select shared key, the other devices in the network will not connect unless 
they are set to Shared Key as well and have the same keys in the same positions as 
those in the WNDAP350.

WEP Encryption Keys.

Circle one: 64, 128, or 152 bits. (Enter all four 802.11a/n keys for the Key Size chosen.)

Key 1: ___________________________________ 

Key 2: ___________________________________ 

Key 3: ___________________________________ 

Key 4: ___________________________________ 

WPA-PSK (Preshared Key).

Record the WPA-PSK key. Key: ___________________________________ 

WPA RADIUS Settings. For WPA, record the following settings for the primary and 
secondary RADIUS servers:

Server Name/IP Address: Primary _________________

Secondary __________________ 

Port: ___________________________________ 

Shared Secret: ___________________________________