Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point 사용자 설명서

Select the key to be used as the default key by checking the radio box. (Data transmissions 
are always encrypted using the default key.)

Wireless Client Security Separation is disabled by default. If enabled, associated wireless 
clients will not be able to communicate with each other. (This feature is intended for hotspots 
and other public access situations.

Click Apply to save your settings.

If you use a wireless computer to configure WEP settings, you will be 
disconnected when you click Apply. Reconfigure your wireless adapter 
to match the new settings or access the wireless access point from a 
wired computer to make any further changes.

Not all wireless adapters support WPA. The wireless adapter hardware and driver must 
support WPA. Consult the product document for your wireless adapter and WPA client 
software for instructions on configuring WPA settings.



Under the Configuration tab, select Security on the main menu, select 

 from 

the left-hand menu, and then select RADIUS Server Settings. The RADIUS Server 
Settings screen displays.

Click Apply to save your RADIUS Server settings.

Under the Configuration tab, select Security from the main menu, and then select either 
Security Profile Settings for 802.11b/bg/ng or 802.11a/na. The screen for the Profile Settings