Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point 사용자 설명서
Basic Installation and Configuration
46
ProSAFE Dual Band Wireless N Access Point WNDAP350
2.
Enter the preshared key passphrase (Network Key).
3.
Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
4.
Click Apply to save your settings.
Configuring WPA2-PSK
Not all wireless adapters support WPA2. Furthermore, client software is required on the
client. Make sure your client card supports WPA2. Consult the product document for your
wireless adapter and WPA2 client software for instructions on configuring WPA2 settings.
client. Make sure your client card supports WPA2. Consult the product document for your
wireless adapter and WPA2 client software for instructions on configuring WPA2 settings.
Figure 24. Configure WPA2-PSK
To configure WPA2-PSK:
1.
From the Network Authentication drop-down menu, select WPA2-PSK from the list. By
default, Data Encryption will be set to AES.
default, Data Encryption will be set to AES.
2.
Enter the preshared key passphrase (Network Key).
3.
Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
4.
Click Apply to save your settings.
Configuring WPA-PSK and WPA2-PSK
Not all wireless adapters support WPA and WPA2. Client software is required on the client.
Make sure your client card supports WPA2. The wireless adapter hardware and driver must
also support WPA2.
Make sure your client card supports WPA2. The wireless adapter hardware and driver must
also support WPA2.