Netgear WNDAP380R - ProSAFE Dual Band Wireless-N Access point 설치 가이드

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste 

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, 

this product should be treated and recycled in accordance with the laws of your jurisdiction 

implementing the WEEE Directive.

©2011 by NETGEAR, Inc. All rights reserved. NETGEAR, the NETGEAR logo, and ProSafe® are registered 

trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are 

trademarks or registered trademarks of their respective holders. Information is subject to change without notice. 

There is a configuration problem. Check these items:

You might not have restarted the computer with the wireless adapter to have 

TCP/IP changes take effect. Restart the computer.

The computer with the wireless adapter might not have the correct TCP/IP 

settings to communicate with the network. Restart the computer and check that 
TCP/IP is set up correctly for that network. The usual setting for Windows on the 
Network Properties is set to “Obtain an IP address automatically.”

The wireless access point’s default values might not work with your network. 

Check the wireless access point default configuration against the configuration 
of other devices in your network.

For full instructions on changing the default values of the wireless access point, 

see the WC7520 Reference Manual.

In the interest of improving internal design, operational function, and/operability, 
NETGEAR reserves the right to make changes to the product described in this 
document without notice. NETGEAR does not assume any liability that may occur 
due to the use or application of the product(s) or circuit layout(s) described herein.

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and 
use it to register your product at 

. Registration is 

required before you can use our telephone support service. Registration via our web 
site is strongly recommended. 

Go to 

 for product updates and Web support. For 

Warranty and Regional Customer Support information, see the Resource CD that 
came with your product.

For complete DoC please visit the NETGEAR EU Declarations of Conformity 
website at: 

WNDAP380R IG 16Dec11.book  Page 2  Thursday, December 15, 2011  10:23 AM