Netgear WN604 - Wireless-N 150 Access Point 사용자 설명서

Manual. Enter the number of hexadecimal digits appropriate to the encryption 

strength: 10 digits for 64-bit, 26 digits for 128–bit, and 32 digits for 152-bit (any 
combination of 0–9, a-f, or A–F).

Select the key to be used as the default key by selecting the radio button. (Data 
transmissions are always encrypted using the default key.)

Wireless client security separation is disabled by default. If it is enabled, associated wireless 
clients cannot communicate with each other. (This feature is intended for hotspots and other 
public access situations.

Click Apply to save your settings.

Wi-Fi Protected Setup (WPS)

WPS is a simple method that lets you easily and securely add a client to the wireless network 
without typing the WPA2 or WPA password. WPS is compatible with WPA2 and WPA 
security. The wireless client has to support WPS for this method to work. 



Select Configuration > WPS. The WPS Settings screen displays:

Select the Enable radio button to enable WPS on your access point.

Adjust the other settings on the screen as needed.

Router’s PIN. This is the PIN that a registrar can use to configure the access point’s 

wireless settings through WPS. This PIN is also on the product label. You can use an 
external registrar to configure the access point’s SSID and security settings through 
WPS, and you will be prompted to enter the PIN that is displayed here.