Netgear WN604 - Wireless-N 150 Access Point 사용자 설명서
Management
35
Wireless N150 Access Point WN604
Upgrade the Wireless Access Point Firmware
The software of the access point is stored in flash memory, and can be upgraded as new
software is released by NETGEAR. You can use your browser to download upgrade files
from the NETGEAR website and to send the upgrade file to the access point. The browser,
such as Microsoft Internet Explorer 6.0 or later or Mozilla 1.5 or above.
software is released by NETGEAR. You can use your browser to download upgrade files
from the NETGEAR website and to send the upgrade file to the access point. The browser,
such as Microsoft Internet Explorer 6.0 or later or Mozilla 1.5 or above.
To upgrade the firmware:
WARNING!
When uploading firmware to the access point, do not interrupt the
web browser by closing the window, clicking a link, or loading a
new page. If the browser is interrupted, the upload might fail,
corrupt the software, and render the access point completely
inoperable.
web browser by closing the window, clicking a link, or loading a
new page. If the browser is interrupted, the upload might fail,
corrupt the software, and render the access point completely
inoperable.
1.
On a computer that is connected to the access point with an Ethernet cable, launch a
browser.
browser.
2.
Download the new software file from the NETGEAR website, and save it to your hard disk.
3.
Log in to the access point.
4.
Select Maintenance > Upgrade > Firmware Upgrade. The Firmware Upgrade screen
displays:
displays:
5.
Click Browse and browse to the location of the upgrade file.
6.
Click Apply.
When the upload is complete, your access point automatically restarts. The upgrade
process typically takes about 2 minutes.
process typically takes about 2 minutes.