Netgear WN604 - Wireless-N 150 Access Point 사용자 설명서

Enable Wireless Bridging

The access point lets you build large bridged wireless networks. Select the desired access 
point mode for your environment: 

Wireless Point-to-Point Bridge. In this mode, the access point can communicate with 

another bridge mode wireless access point, and with wireless clients if this option is 
enabled.

Wireless Point-to-Multi-Point Bridge. Select this only if this WN604 is the master for a 

group of bridge-mode wireless access points.

The other bridge-mode wireless access points has to be set to point-to-point bridge 
mode, using the MAC address of this WN604. They then send all traffic to this “Master”, 
rather than communicating directly with each other. The WN604 can associate with 
wireless clients if this option is enabled.

Client. In this mode the access point acts as a client. It is used to extend the LAN of 

clients that do not have wireless connectivity.



Select Configuration > Wireless Bridge. The following screen displays:

Select the Enable Wireless Bridging check box.

Select one of the following radio buttons:

Wireless Point-to-Point Bridge

Wireless Point to Multi-Point Bridge 

Client mode

If you selected one of the first two options: 

Select the security profile whose settings you want to edit.

In the Enable Wireless Association table, select the Enable check box for the profile 

you want to edit.