Netgear WNDAP360 - ProSAFE Dual Band Wireless-N Access point 참조 매뉴얼
Management
69
ProSAFE Dual Band Wireless-N Access Point WNDAP360
Enable the Syslog Server
The Syslog screen allows you to enable the syslog option if you have a syslog server on your
LAN. If syslog is enabled, the wireless access point sends its syslog files to the syslog server.
LAN. If syslog is enabled, the wireless access point sends its syslog files to the syslog server.
To enable a syslog server:
1.
Select Configuration > System > Advanced > Syslog. The Syslog screen displays:
Figure 41.
Specify the settings as explained in the following table:
2.
. Click Apply to save your settings.
Monitor the Wireless Access Point
The wireless access point provides a variety of status and usage information that is
discussed in the following sections:
discussed in the following sections:
Table 17. Syslog Settings
Field
Description
Enable Syslog
Select the check box to enable the syslog option. By default, the syslog option
is disabled.
is disabled.
Syslog Server IP Address
Enter the IP address of the syslog server to which the wireless access point
sends the syslog files.
sends the syslog files.
Port Number
Enter the port number that is configured on the syslog server. The default port
number is 514.
number is 514.