Netgear WNAP320 - ProSAFE Wireless-N Access Point 참조 매뉴얼
Chapter 1. Introduction
|
11
ProSAFE Wireless-N Access Point WNAP320 Reference Manual
Top Panel
The ProSAFE Wireless-N Access Point WNAP320 LEDs are described in the following figure
and table:
and table:
Figure 1.
Table 1. Top Panel LEDs
Item
LED
Description
1
Power/Test Off
Power is off.
On (green)
Power is on.
Amber, then blinking
green
A self-test is running or software is being loaded.
During startup, the LED is first steady amber, then
goes off, and then blinks green before turning steady
green after about 45 seconds. If after 1 minute the
LED remains amber or continues to blink green, it
indicates a system fault.
goes off, and then blinks green before turning steady
green after about 45 seconds. If after 1 minute the
LED remains amber or continues to blink green, it
indicates a system fault.
2
Active
Off
No Ethernet traffic is detected or no link is detected.
On or blinking (green)
Ethernet traffic is detected.
3
LAN
Off
10 Mbps or no link is detected.
Amber
10/100 Mbps link is detected.
Green
1000 Mbps link is detected.
4
WLAN
Off
Wireless LAN is not ready or no wireless activity is
detected.
detected.
On or blinking (green)
Wireless LAN is ready or wireless activity is detected.
1
2
3
4