Netgear WNAP320 - ProSAFE Wireless-N Access Point 참조 매뉴얼

Supported Standards and Conventions

The ProSAFE Wireless-N Access Point WNAP320 supports the following standards and 
conventions:

Standards compliance. The wireless access point complies with the IEEE 802.11 b/g 

standards for wireless LANs, and is Wi-Fi certified for 802.11n standard.

Full WPA and WPA2 support. The wireless access point provides WPA and WPA2 

enterprise-class strong security with RADIUS and certificate authentication as well as 
dynamic encryption key generation. The WPA-PSK and WPA2-PSK preshared key 
authentication is without the overhead of RADIUS servers but with all of the strong 
security of WPA.

Multiple BSSIDs. The wireless access point supports multiple BSSIDs. When a wireless 

access point is connected to a wired network and a set of wireless stations, it is called a 
basic service set (BSS). The basic service set identifier (BSSID) is a unique identifier 
attached to the header of packets sent over a WLAN that differentiates one WLAN from 
another when a mobile device tries to connect to the network.

The multiple BSSID feature allows you to configure up to eight SSIDs on your wireless 
access point and assign different configuration settings to each SSID. All the configured 
SSIDs are active, and the network devices can connect to the wireless access point by 
using any of these SSIDs.

DHCP client support. DHCP provides a dynamic IP address to PCs and other devices 

upon request. The wireless access point can act as a client and obtain information from 
your DHCP server; it can also act as a DHCP server and provide network information for 
wireless clients.

SNMP Support. Support for Simple Network Management Protocol (SNMP) 

Management Information Base (MIB) management.

802.1Q VLAN (virtual LAN) support. A network of computers that behave as if they are 

connected to the same network even though they might actually be physically located on 
different segments of a LAN. VLANs are configured through software rather than 
hardware, which makes them extremely flexible. VLANs are very useful for user and host 
management, bandwidth allocation, and resource optimization. 

Key Features

The ProSAFE Wireless-N Access Point WNAP320 provides solid functionality, including the 
following features:

Multiple operating modes:

Wireless access point. Operates as a standard 802.11b/g/n wireless access point.

Point-to-point bridge. In this mode, the wireless access point communicates only 
with another bridge-mode wireless station or wireless access point. Network 
authentication should be used to protect this communication. 

Point-to-multipoint bridge. Select this only if this wireless access point is the master 
for a group of bridge-mode wireless stations. The other bridge-mode wireless stations