Netgear WNAP320 - ProSAFE Wireless-N Access Point 참조 매뉴얼

Configure the Wireless Access Point for Client Mode

In client mode, the wireless access point operates as a client bridge only and sends all traffic 
to the selected remote wireless access point or peer device.

Select Configuration > Wireless Bridge. The Bridging screen displays:

Select the Enable Wireless Bridging check box. The Local MAC Address field is a 
nonconfigurable field that shows the MAC address of the wireless access point.

Select the Client radio button. (The Edit button becomes nonoperational after you have 
selected the Client button.)

As an option, you can now enable MAC cloning, which allows only wireless connections to 

computers or wireless stations for which you have added the MAC address to the 
Trusted Wireless Stations table. For more information, see 

To enable MAC cloning:

a. Next to MAC Clone, select the Enable radio button. By default, the Disable radio 

button is selected.

b.  In the MAC Clone Address field, enter the MAC address.

Click Apply to save your settings.