Netgear FVM318 – Cable and DSL ProSafe Wireless VPN Security Firewall 참조 매뉴얼

Preparing Your Network

C-7

2.

Type 

, and then click OK.

The IP Configuration window opens, which lists (among other things), your IP address, subnet 
mask, and default gateway.

3.

From the drop-down box, select your Ethernet adapter.

The window is updated to show your settings, which should match the values below if you are 
using the default TCP/IP settings that NETGEAR recommends for connecting through a 
router or gateway:

•

The IP address is between 192.168.0.2 and 192.168.0.254

•

The subnet mask is 255.255.255.0

•

The default gateway is 192.168.0.1

As part of the PC preparation process, you may need to install and configure 

 

TCP/IP on each networked PC. Before starting, locate your Windows CD; you may need to insert 
it during the TCP/IP installation process.

To install or verify the necessary components for IP networking:

1.

On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2.

Double-click the Network and Dialup Connections icon.

3.

If an Ethernet adapter is present in your PC, you should see an entry for Local Area 
Connection. Double-click that entry.

4.

Select Properties.

5.

Verify that ‘Client for Microsoft Networks’ and ‘Internet Protocol (TCP/IP)’ are present. If 
not, select Install and add them.

6.

Select ‘Internet Protocol (TCP/IP)’, click Properties, and verify that “Obtain an IP address 
automatically is selected.

7.

Click OK and close all Network and Dialup Connections windows.

8.

Then, restart your PC.