Netgear FVM318 – Cable and DSL ProSafe Wireless VPN Security Firewall 참조 매뉴얼

1-2

Introduction

The FVM318 firewall allows you to easily create an IPSec-encrypted VPN tunnel from your 
wireless PC to the firewall.

•

Easy to deploy - The included SafeNet SoftRemote Basic VPN client requires only three 
parameters to configure a secure connection to the firewall.

•

256 bit AES encryption provides a much higher level of protection than WEP.

Unlike simple Internet sharing NAT routers, the FVM318 is a true firewall, using stateful packet 
inspection to defend against hacker attacks. Its firewall features include:

•

Denial of Service (DoS) protection.

Automatically detects and thwarts DoS attacks such as Ping of Death, SYN Flood, LAND 
Attack, and IP Spoofing.

•

Blocks unwanted traffic from the Internet to your LAN.

•

Blocks access from your LAN to Internet locations or services that you specify as off-limits.

•

Logs security incidents.

The FVM318 will log security events such as blocked incoming traffic, port scans, attacks, 
and administrator logins. You can configure the firewall to email the log to you at specified 
intervals. You can also configure the firewall to send immediate alert messages to your email 
address or email pager whenever a significant event occurs.

•

With its content filtering feature, the FVM318 prevents objectionable content from reaching 
your PCs. The firewall allows you to control access to Internet content by screening for 
keywords within Web addresses. You can configure the firewall to log and report attempts to 
access objectionable Internet sites.

With its internal 8-port 10/100 switch, the FVM318 can connect to either a 10 Mbps standard 
Ethernet network or a 100 Mbps Fast Ethernet network. The LAN interfaces are autosensing and 
capable of full-duplex or half-duplex operation.