Netgear FVM318 – Cable and DSL ProSafe Wireless VPN Security Firewall 참조 매뉴얼
Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
C-16
Preparing Your Network
Verifying TCP/IP Properties for Windows XP, 2000, and NT4
To check your PC’s TCP/IP configuration:
1.
On the Windows taskbar, click the Start button, and then click Run.
The Run window opens.
2.
Type
cmd
and then click OK.
A command window opens
3.
Type
ipconfig /all
Your IP Configuration information will be listed, and should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
•
The IP address is between 192.168.0.2 and 192.168.0.254
•
The subnet mask is 255.255.255.0
The TCP/IP Properties dialog box now
displays.
displays.
•
Click the IP Address tab.
•
Select the radio button marked Obtain
an IP address from a DHCP server.
an IP address from a DHCP server.
•
Click OK. This completes the
configuration of TCP/IP in Windows
NT.
configuration of TCP/IP in Windows
NT.
Restart the PC.
Repeat these steps for each PC with this
version of Windows on your network.
version of Windows on your network.