Netgear FVM318 – Cable and DSL ProSafe Wireless VPN Security Firewall 참조 매뉴얼

2-8

Connecting the Firewall to the Internet

a.

You are now connected to the firewall. If you do not see the menu above, click the Setup 
Wizard link on the upper left of the main menu. 

b.

Click Next and follow the steps in the Setup Wizard for inputting the configuration 
parameters from your ISP to connect to the Internet.

Note: If you choose not to use the Setup Wizard, you can manually configure your 
Internet connection settings by following the procedure 

 

 

Unless your ISP assigns your configuration automatically via DHCP, you will need the 
configuration parameters from your ISP as you recorded them previously in 

.

c.

When the firewall successfully detects an active Internet service, the Setup Wizard reports 
which connection type it discovered, and displays the appropriate configuration menu. If 
the Setup Wizard finds no connection, you will be prompted to check the physical 
connection between your firewall and the cable or DSL line. 

d.

The Setup Wizard will report the type of connection it finds. The options are:

•

Connections which require a login using protocols such as PPPoE.

Note: Customers in Austria or Australia who use Internet accounts which require 
login will have to use the manual configuration procedure, 

. The Smart Wizard will not detect these 

options.

•

Connections which use dynamic IP address assignment.

•

Connections which use fixed IP address assignment.

The procedures for filling in the configuration menu for each type of connection follow 
below.