Netgear FVM318 – Cable and DSL ProSafe Wireless VPN Security Firewall 참조 매뉴얼
Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
Virtual Private Networking
5-17
3. Check the VPN Connection.
To check the VPN Connection, you can initiate a request from the remote PC to the FVM318’s
network. Since the remote PC has a dynamically assigned WAN IP address, it must initiate the
request. The simplest method is to ping from the remote PC to the LAN IP address of the
FVM318. Using our example, start from the remote PC:
network. Since the remote PC has a dynamically assigned WAN IP address, it must initiate the
request. The simplest method is to ping from the remote PC to the LAN IP address of the
FVM318. Using our example, start from the remote PC:
a.
Establish an Internet connection from the PC.
b.
On the Windows taskbar, click the Start button, and then click Run.
c.
Type
ping -t 192.168.3.1
, and then click OK.
Figure 5-13: Running a Ping test to the LAN from the PC
This will cause a continuous ping to be sent to the first FVM318. After between several
seconds and two minutes, the ping response should change from “timed out” to “reply.”
seconds and two minutes, the ping response should change from “timed out” to “reply.”
Figure 5-14: Ping test results
Once the connection is established, you can open the browser of the remote PC and enter the LAN
IP Address of the remote FVM318. After a short wait, you should see the login screen of the
firewall.
IP Address of the remote FVM318. After a short wait, you should see the login screen of the
firewall.