Netgear FVS338 – ProSafe VPN Firewall 50 with 8-Port 10/100 Switch 사용자 설명서
Advanced Settings
53
NETGEAR ProSAFE VPN Client
After you define a remote computer, you can connect to it from the system tray menu. The
VPN tunnel with which the remote computer is associated opens automatically.
Figure 5. Remote computer option in the system tray menu
USB Mode
Note:
USB mode is supported in VPN Client Professional, but not in VPN
Client Lite.
Client Lite.
You can save VPN configurations and VPN security elements such as pre-shared keys and
certificates onto a USB drive to allow you to do the following:
certificates onto a USB drive to allow you to do the following:
•
Limit a VPN configuration to a specific computer. VPN tunnels that are defined in the VPN
configuration can be used only on a specific computer.
configuration can be used only on a specific computer.
•
Limit a VPN configuration to a specific USB drive. VPN tunnels that are defined in the
VPN configuration can be used only with a specific USB drive.
VPN configuration can be used only with a specific USB drive.
After you move a VPN configuration and its security elements onto a USB drive and remove
the USB drive, insert the USB drive into a computer to automatically open the tunnels. When
you remove the USB drive from the computer, all open tunnels are automatically closed.
you remove the USB drive from the computer, all open tunnels are automatically closed.
Enable a New USB Drive with a VPN Configuration
You can enable a new USB drive by copying a VPN configuration and its security elements
onto it in one of the following ways:
onto it in one of the following ways:
•
Export the configuration and copy the VPN configuration file onto the USB drive. (See
67.)
•
Use the USB Mode Wizard.