Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch 소프트웨어 가이드
Utility Commands
263
M5300, M6100, and M7100 Series ProSAFE Managed Switches
Command example:
<NETGEAR Switching> show hosts
Host name......................... Device
Default domain.................... gm.com
Default domain list............... yahoo.com, Stanford.edu, rediff.com
Domain Name lookup................ Enabled
Number of retries................. 5
Retry timeout period.............. 1500
Name servers (Preference order)... 176.16.1.18 176.16.1.19
DNS Client Source Interface....... (not configured)
Configured host name-to-address mapping:
Host Addresses
------------------------------ ------------------------------
accounting.gm.com 176.16.8.8
Host Total Elapsed Type Addresses
--------------- -------- ------ -------- ---------------
www.stanford.edu 72 3 IP 171.64.14.203
IP Address Conflict Commands
The commands in this section help troubleshoot IP address conflicts.
ip address-conflict-detect run
This command triggers the switch to run active address conflict detection by sending
gratuitous ARP packets for IPv4 addresses on the switch.
gratuitous ARP packets for IPv4 addresses on the switch.
Number of Retries
Number of time to retry sending Domain Name System (DNS) queries.
Retry Timeout
Period
Period
Amount of time to wait for a response to a DNS query.
Name Servers
Configured name servers.
DNS Client Source
Interface
Interface
Shows the configured source interface (source IP address) used for a DNS client. The IP address of
the selected interface is used as source IP for all communications with the server.
the selected interface is used as source IP for all communications with the server.
Format
ip address-conflict-detect run
Mode
Global Config
Field
Description