Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch 소프트웨어 가이드

Switching Commands

620

M5300, M6100, and M7100 Series ProSAFE Managed Switches

Command example:

(NETGEAR Switch) #show udld 0/1

Port Admin Mode UDLD Mode UDLD Status

----- ---------- ----------- --------------

0/1 Enabled Normal Not Applicable

Command example:

(NETGEAR Switch) #show udld all

Port Admin Mode UDLD Mode UDLD Status

----- ---------- ----------- --------------

0/1 Enabled Normal Shutdown

0/2 Enabled Normal Undetermined

0/3 Enabled Normal Bidirectional

0/4 Enabled Normal Not Applicable

0/5 Enabled Normal Not Applicable

0/6 Enabled Normal Not Applicable

0/7 Enabled Normal Not Applicable

0/8 Enabled Normal Shutdown

0/9 Enabled Normal Not Applicable

0/10 Enabled Normal Not Applicable

0/11 Enabled Normal Not Applicable

0/12 Enabled Normal Undetermined

0/13 Enabled Normal Bidirectional

0/14 Disabled Normal Not Applicable

0/15 Disabled Normal Not Applicable

0/16 Disabled Normal Not Applicable

0/17 Disabled Normal Not Applicable

0/18 Disabled Normal Not Applicable

0/19 Disabled Normal Not Applicable

0/20 Disabled Normal Not Applicable

Link Debounce Commands

Link debouncing functions on a per-port basis on physical interfaces. After you configure link
debouncing, if the switch receives a link-down notification, the switch starts monitoring the
link event by starting a timer with the configured debounce time. Any intermediate link-down
and link-up events are ignored hereafter. When the timer expires, link debounce checks if the
current state of the link is still down; if so, it forwards a link-down notification to the upper
layer applications.