Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch 관리자 가이드
BGP
196
Managed Switches
Example 8: Exchange IPv6 Routes over an IPv4 BGP
IPv6 BGP configuration is similar to IPv4 BGP. The following example shows how to set up
an IPv6 BGP session. In this example, we set up an IPv6 BGP session between Switches A
and C.
an IPv6 BGP session. In this example, we set up an IPv6 BGP session between Switches A
and C.
Configure IPv6 BGP on Switch A
1.
Enable IPv6 unicast globally.
(Netgear Switch) (Config) #ipv6 unicast-routing
2.
Configure the IPv6 address on port 1/0/2.
(Netgear Switch) (Config) #interface 1/0/2
(Netgear Switch) (Interface 1/0/2) #routing
(Netgear Switch) (Interface 1/0/2) #ipv6 enable
(Netgear Switch) (Interface 1/0/2)#ipv6 address 2001:1:1::1/64
3.
Configure IPv6 BGP.
(Netgear Switch) (Config) #router bgp 100
(Netgear Switch) (Config-router) #neighbor 2001:1:1::2 remote-as 100
(Netgear Switch) (Config-router) #address-family ipv6
(Netgear Switch) (config-router-af) #neighbor 2001:1:1::2 activate
Configure IPv6 BGP on Switch B
1.
Enable IPv6 unicast globally.
(Netgear Switch) (Config) #ipv6 unicast-routing
2.
Configure the IPv6 address on port 1/0/1.
(Netgear Switch) (Config) #interface 1/0/1
(Netgear Switch) (Interface 1/0/2) #routing
(Netgear Switch) (Interface 1/0/2) #ipv6 enable
(Netgear Switch) (Interface 1/0/2) #ipv6 address 2001:1:1::2/64