Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch 관리자 가이드

The example is shown as CLI commands and as a web interface procedure.

Use the following commands to assign port 1/0/1 to promiscuous port mode and ports 
1/0/2-1/0/5 to host port mode. 

(Netgear Switch)  #config 

(Netgear Switch)  (Config)#interface 1/0/1

(Netgear Switch)  (Interface 1/0/1)#switchport mode private-vlan promiscuous

(Netgear Switch)  (Interface 1/0/1)#exit

(Netgear Switch)  (Config)#interface 1/0/2-1/0/5

(Netgear Switch)  (Interface 1/0/2-1/0/5)#switchport mode private-vlan host

(Netgear Switch)  (Interface 1/0/2-1/0/5)#end

Configure port 1/0/1 to promiscuous port mode.

a. Select Security > Traffic Control > Private VLAN > Private VLAN Port Mode 

Configuration. 

A screen similar to the following displays.

b.  Under Private VLAN Port Mode Configuration, select the 1/0/1 interface check 

box. 

Now 1/0/1 appears in the Interface field at the top.

c.  In the Port VLAN Mode field, select Promiscuous from the pull-down menu.