Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch 소프트웨어 가이드
Configure System Information
104
M6100, M5300, and M7100 Series Managed Switches
Enable or Disable DHCPv6 Server
You can configure the Dynamic Host Configuration Protocol for IPv6 (DHCPv6) server
settings on the device. The device can act as a DHCPv6 server or DHCPv6 relay agent to
help assign network configuration information to IPv6 clients.
settings on the device. The device can act as a DHCPv6 server or DHCPv6 relay agent to
help assign network configuration information to IPv6 clients.
To enable or disable DHCP service:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System > Services > DHCPv6 Server > DHCPv6 Server Configuration.
8.
Select the Admin mode Disable or Enable radio button.
This specifies whether the DHCPv6 Service administrative mode is enabled or disabled
The default value is Disable.
The default value is Disable.
9.
Use the DHCPv6 Server DUID field to specify the DHCP Unique Identifier (DUID) of the
DHCPv6 server.
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.