Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch 소프트웨어 가이드

It is active only after the next reboot. To revert to the default template after the next 
reboot, use the Default option. Possible values are as follows:

Dual IPv4 and IPv6

IPv4 Routing Default

IPv4 Data Center

IPv4 Data Center Plus

Dual IPv4 and IPv6 Data Center

The following table displays Summary information.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

SDM Current Template ID

The current active SDM template. Possible values are as follows:

Dual IPv4 and IPv6

IPv4-routing Default

IPv4 Data Center

SDM Template

Identifies the template. The possible values are as follows:

Dual IPv4 and IPv6

IPv4-routing Default

IPv4 Data Center

ARP Entries

The maximum number of entries in the IPv4 Address Resolution 
Protocol (ARP) cache for routing interfaces.

IPv4 Unicast Routes

The maximum number of IPv4 unicast forwarding table entries.

IPv6 NDP Entries

The maximum number of IPv6 Neighbor Discovery Protocol (NDP) 
cache entries.

IPv6 Unicast Routes

The maximum number of IPv6 unicast forwarding table entries.

ECMP Next Hops

The maximum number of next hops that can be installed in the IPv4 
and IPv6 unicast forwarding tables.

IPv4 Multicast Routes

The maximum number of IPv4 multicast forwarding table entries.

IPv6 Multicast Routes

The maximum number of IPv6 multicast forwarding table entries.