Netgear XCM8806 - 8800 SERIES 6-SLOT CHASSIS SWITCH 하드웨어 매뉴얼

Do not set the router ID to 0.0.0.0.

For information about licensing requirements, see Appendix A in the NETGEAR 8800 User 
Manual.

OSPF Edge Mode

OSPF Edge Mode is a subset of OSPF available on platforms with an Advanced Edge 
license. There are two restrictions on OSPF Edge Mode:

At most, four Active OSPF VLAN interfaces are permitted. There is no restriction on the 

number of Passive interfaces.

The OSPF Priority on VLANs is zero, and is not configurable. This prevents the system 

from acting as a DR or BDR.

clear ospfv3 {domain <domainName>} counters 



{ interfaces [[vlan | tunnel] all | vlan <vlan-name> | 



tunnel <tunnel-name> | area <area-identifier>] 



| area [all | <area-identifier>] 



| virtual-link [all | {routerid} <router-identifier> 



{area} <area-identifier>] 



| neighbor [all | routerid <router-identifier> | vlan <vlan-name> |



tunnel <tunnel-name>]



| system



}

Clears the OSPFv3 counters (statistics).

domainName

Specifies an OSPFv3 domain. OSPF-Default is the only one currently 
supported.

all

Specifies all VLANs, tunnels, areas, neighbors, or virtual-links.

vlan-name

Specifies an IPv6 configured VLAN.

tunnel-name

Specifies an IPv6 tunnel.

router-identifier

Specifies a router identifier, a four-byte, dotted decimal number.

area-identifier

Specifies an OSPFv3 area, a four-byte, dotted decimal number. 

system

Specifies the OSPFv3 system/global counters.