Netgear FS116Pv2 - ProSAFE 16PT 10/100 SWITCH W/POE 설치 가이드
May 2013
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other
countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
350 East Plumeria Drive
San Jose, CA 95134 USA
Specifications
Specification
Description
Network interface
RJ-45 connector for 10BASE-T, or 100BASE-TX
Network cable
Category 5 (Cat 5) or better Ethernet cable
Ports
16
Power adapter
48V @ 1.66A/1.875A DC input
Power consumption
80W max.
PoE Power budget
70W max. (all PoE ports, Port 1 – Port 8), 15.4W max. per PoE
port
port
Weight
0.85 kg (1.874 lbs)
Dimensions
(W x D x H)
(W x D x H)
286 mm x 102 mm x 27 mm
11.26 in. x 4.02 in. x 1.06 in.
11.26 in. x 4.02 in. x 1.06 in.
Operating
temperature
temperature
0° to 40° C (32° to 104° F)
Operating humidity
10% to 90% relative humidity, non-condensing
Electromagnetic
compliance
compliance
CE Class A, FCC Class A, VCCI Class A,
Safety agency
approvals
approvals
CB, CCC
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and
use it to register your product at
use it to register your product at
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit
NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit
.
NETGEAR recommends that you use only the official NETGEAR support
resources.
resources.
For the current EU Declaration of Conformity, visit
FS116Pv2 IG 22sept12.fm Page 2 Wednesday, May 22, 2013 5:27 PM