Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 사용자 설명서
Configure System Information
143
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
7.
Use Timer to specify the period of time between sending new ISDP packets.
The range is 5 to 254 seconds. The default value is 30 seconds.
8.
Use Hold Time to specify the hold time for ISDP packets that the switch transmits.
The hold time specifies how long a receiving device must store information sent in the
ISDP packet before discarding it. The range 10 to 255 seconds. The default value is 180
seconds.
ISDP packet before discarding it. The range 10 to 255 seconds. The default value is 180
seconds.
9.
Select the Version 2 Advertisements Disable or Enable radio button.
This enables or disables the sending of ISDP version 2 packets from the device. The
default value is Enabled.
default value is Enabled.
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the ISDP Basic Global Configuration fields.
Configure ISDP Global Settings
To configure ISDP global settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select System > ISDP > Advanced > Global Configuration.
Table 55. ISDP Basic Global Configuration
Field
Description
Neighbors table last time changed Specifies if
Device ID
The device ID of this switch.
Device ID Format Capability
The device ID format capability.
Device ID Format
The device ID format.