Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 사용자 설명서



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

> Multicast > MLD Snooping > Interface Configuration.

All physical, VLAN, and LAG interfaces are displayed.

Use one of the following methods to select an interface:

In the Go To Interface field, enter the interface in the unit/slot/port format and click on 
the Go button.

Next to the Interface column, select the check box for the interface that you want to 
configure 

All physical, VLAN, and LAG interfaces are listed in the Interface column.

Use Admin Mode to select the interface mode for the selected interface for MLD snooping 

for the switch. The default is Disable.

Use Group Membership Interval(secs) to specify the amount of time you want the switch 

to wait for a report for a particular group on a particular interface before it deletes that 

interface from the group. 

The valid range is from 2 to 3600 seconds. The configured value must be greater than 
Max Response Time. The default is 260 seconds.

Use Max Response Time (secs) to specify the amount of time you want the switch to wait 

after sending a query on an interface because it did not receive a report for a particular 

group on that interface.