Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 사용자 설명서
Multicast Routing
450
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable data that is displayed.
Configure IPv6 Multicast Static Routes
To configure IPv6 multicast static routes settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> IPv6 Multicast > Static Routes Configuration.
Table 179. IPv6 Multicast MLD Proxy Membership
Field
Description
Proxy Interface
The interface on which the MLD proxy is enabled.
Group IP
The IPv6 multicast group address.
Source Hosts
Source addresses that are members of this multicast address.
Last Reporter
The IPv6 address of the source of the last membership report received
for the IPv6 multicast group address on the MLD proxy interface.
for the IPv6 multicast group address on the MLD proxy interface.
Up Time
The time elapsed since this entry was created.
Expiry Time
The expiry time interval against each source address that is a member
of this multicast group. This is the amount of time after which the
specified source entry is aged out.
of this multicast group. This is the amount of time after which the
specified source entry is aged out.
State
The state of the host entry. A host can be in one of the following states:
•
Non-member state. Does not belong to the group on the interface.
•
Delaying member state. Host belongs to the group on the interface
and report timer running. The report timer is used to send out the
reports.
and report timer running. The report timer is used to send out the
reports.
•
Idle member state. Host belongs to the group on the interface and
no report timer is running.
no report timer is running.
Filter Mode
The group filter mode (Include/Exclude/None) for the specified group
on the MLD proxy interface. Possible modes are as follows:
on the MLD proxy interface. Possible modes are as follows:
•
Include
•
Exclude
•
None
Number of Sources
The number of source hosts present in the selected multicast group.