Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 사용자 설명서

Select System > Management > DNS > Host Configuration.

In the Host Name (1 to 255 characters) field, specify the static host name to add. 

Its length cannot exceed 255 characters and it is a mandatory field.

In the IP Address field, enter the IP address in standard IPv4 dot notation to associate with 

the host name. 

Click the Add button. 

The entry appears in the list on the page.

The Dynamic Host Mapping table shows host name-to-IP address entries that the switch 
learned. The following table describes the dynamic host fields.

A Switch Database Management (SDM) template is a description of the maximum resources 

a switch or router can use for various features. Different SDM templates allow different 
combinations of scaling factors, enabling different allocations of resources depending on how 
the device is used. In other words, SDM templates enable you to reallocate system 
resources to support a different mix of features based on your network requirements.

Host 

Lists the host name that you assign to the specified IP address.

Total

Amount of time since the dynamic entry was first added to the table.

Elapsed

Amount of time since the dynamic entry was last updated.

Type

The type of the dynamic entry.

Addresses

Lists the IP address associated with the host name.