Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 소프트웨어 가이드
Switch Software Log Messages
1081
M4200 and M4300 Series ProSAFE Managed Switches
Management
Table 30. DHCPv4 Client Log Messages
Component
Message
Cause
DHCP4 Client
Unsupported subOption (xxx) in Vendor Specific
Option in received DHCP pkt
Option in received DHCP pkt
This message appears when a message is
received from the DHCP Server that contains an
un-supported Vendor Option.
received from the DHCP Server that contains an
un-supported Vendor Option.
DHCP4 Client
Failed to acquire an IP address on xxx; DHCP
Server did not respond.
Server did not respond.
This message appears when the DHCP Client
fails to lease an IP address from the DHCP
Server.
fails to lease an IP address from the DHCP
Server.
DHCP4 Client
DNS name server entry add failed.
This message appears when the update of a
DNS Domain name server info given by the
DHCP Server to the DNS Client fails.
DNS Domain name server info given by the
DHCP Server to the DNS Client fails.
DHCP4 Client
DNS domain name list entry addition failed.
This message appears when the update of a
DNS Domain name list info given by the DHCP
Server to the DNS Client fails.
DNS Domain name list info given by the DHCP
Server to the DNS Client fails.
DHCP4 Client
Interface xxx Link State is Down. Connect the
port and try again.
port and try again.
This message appears when the Network
protocol is configured with DHCP without any
active links in the Management VLAN.
protocol is configured with DHCP without any
active links in the Management VLAN.
Table 31. SNMP Log Message
Component
Message
Cause
SNMP
EDB Callback: Unit Join: x.
A new member joined the stack.
Table 32. EmWeb Log Messages
Component
Message
Cause
EmWeb
EMWEB (Telnet): Max number of Telnet login
sessions exceeded
sessions exceeded
A user attempted to connect via telnet when the
maximum number of telnet sessions were
already active.
already active.
EmWeb
EMWEB (SSH): Max number of SSH login
sessions exceeded
sessions exceeded
A user attempted to connect via SSH when the
maximum number of SSH sessions were already
active.
active.
EmWeb
Handle table overflow
All the available EmWeb connection handles are
being used and the connection could not be
made.
made.
EmWeb
ConnectionType EmWeb socket accept() failed:
errno
errno
Socket accept failure for the specified connection
type.
type.