Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 소프트웨어 가이드
Management Commands
75
M4200 and M4300 Series ProSAFE Managed Switches
show telnetcon
This command displays the current inbound Telnet settings. In other words, these settings
apply to Telnet connections initiated from a remote system to the switch.
apply to Telnet connections initiated from a remote system to the switch.
Secure Shell Commands
This section describes the commands you use to configure Secure Shell (SSH) access to the
switch. Use SSH to access the switch from a remote management host.
switch. Use SSH to access the switch from a remote management host.
Note:
The system allows a maximum of 5 SSH sessions.
ip ssh
Use this command to enable SSH access to the system. (This command is the short form of
the ip ssh server enable command.)
the ip ssh server enable command.)
Format
show telnetcon
Modes
•
Privileged EXEC
•
User EXEC
Term
Definition
Remote Connection Login
Timeout (minutes)
Timeout (minutes)
This object indicates the number of minutes a remote connection session is allowed to remain
inactive before being logged off. May be specified as a number from 1 to 160. The factory
default is 5.
inactive before being logged off. May be specified as a number from 1 to 160. The factory
default is 5.
Maximum Number of
Remote Connection
Sessions
Remote Connection
Sessions
This object indicates the number of simultaneous remote connection sessions allowed. The
factory default is 5.
factory default is 5.
Allow New Telnet
Sessions
New Telnet sessions will not be allowed when this field is set to no. The factory default value
is yes.
is yes.
Telnet Server Admin
Mode
Mode
States whether the Telnet Server Admin Mode is enabled or disabled.
Telnet Server Port
The port number on which the Telnet server can detect requests.
Default
disabled
Format
ip ssh
Mode
Privileged EXEC