Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 하드웨어 매뉴얼

This section describes the hardware interfaces of the M4300 series switch models.

To enable high-speed copper and long-distance connections on the switch, RJ-45 
10GBASE-T copper ports support speeds of up to 10 Gbps.

To enable high-speed fiber and long-distance connections on the switch, SFP+ fiber ports 
accommodate standard 10G and 1G SFP+ transceiver modules, which are sold separately. 

The switch supports the following NETGEAR ProSAFE SFP and SFP+ transceiver modules 
and cables:

Short reach transceiver modules:

AGM731F SFP transceiver 1000BASE-SX, SFP multimode LC GBIC

AGM734 SFP transceiver 1000BASE-T, SFP copper RJ-45 GBIC

AXM761 SFP+ transceiver 10GBASE-SR, SFP+ multimode LC GBIC

Long reach transceiver modules:

AGM732F SFP transceiver 1000BASE-LX, SFP single mode LC GBIC

AXM762 SFP+ transceiver 10GBASE-LR, SFP+ single mode LC GBIC

AXM764 SFP+ transceiver 10GBASE-LR Lite, SFP+ single mode LC GBIC

Cables:

AXC761 SFP+ 1m direct attach cable

AXC763 SFP+ 3m direct attach cable

For more information about NETGEAR ProSAFE SFP and SFP+ transceiver modules and 
cables, visit 

.

10GBASE-T RJ45 ports

(one LED per port)

Off .    No  link  is  established  on  the  copper  port.

Solid green .  The copper port established a valid 10 Gbps link.

Blinking green .   The  copper  port  is  transmitting  or  receiving  packets  at 
10 Gbps.

Solid yellow .  The copper port established a valid 1 Gbps or 100 Mbps link.

Blinking yellow .  The copper port is transmitting or receiving packets at 1 Gbps 
or 100 Mbps.