Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 관리자 가이드

View the following VLAN status information:

. The VLAN Identifier (VID) of the VLAN. The range of the VLAN ID is (1 to 

4093) 

. The name of the VLAN. VLAN ID 1 is always named Default. 

 Type. The VLAN type: 

 (VLAN ID = 1). always present.

. a VLAN you have configured.

. The VLAN that is created by GVRP registration initially has a type of 

Dynamic (GVRP). 

The type of AUTO VoIP Vlan is Dynamic (AUTO VoIP). The VLAN that is created 
by MVRP registration initially has a type of Dynamic (MVRP). The VLAN that is 
created by L2 Tunnel has a type of Dynamic (L2 Tunnel). The VLAN that is 
created by IP VLAN has a type of Dynamic (IP VLAN). The VLAN that is created 
by DOT1x registration has a type of Dynamic (DOT1X). The VLAN that is created 
by open flow registration has a type of Dynamic (OPENFLOW). The type of Auto 
Video Vlan is Auto-Video. 

. Displays the routing interface.

. The ports that are included in the VLAN.. 

Port VLAN ID Configuration

The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface. 
There are certain requirements for a PVID:

All ports must have a defined PVID.

If no other value is specified, the default VLAN PVID is used.

If you want to change the port’s default PVID, you must first create a VLAN that includes 
the port as a member.

Use the Port VLAN ID (PVID) Configuration screen to configure a virtual LAN on a port.