Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 관리자 가이드
125
GS752TXS and GS728TXS Smart Switches
MST Configuration
Use the Spanning Tree MST Configuration screen to configure Multiple Spanning Tree
(MST) on the switch.
(MST) on the switch.
To configure an MST instance:
1.
Select Switching
STP
Advanced
MST Configuration
.
2.
Configure the MST values:
•
MST ID
. Specify the ID of the MST to create. Valid values for this are between 1 and
4094.
•
Priority
. Specifies the bridge priority value for the MST. When switches or bridges are
running STP, each is assigned a priority. After exchanging BPDUs, the switch with the
lowest priority value becomes the root bridge. The bridge priority is a multiple of 4096.
If you specify a priority that is not a multiple of 4096, the priority is automatically set to
the next lowest priority that is a multiple of 4096. For example, if the priority is
attempted to be set to any value between 0 and 4095, it will be set to 0. The default
priority is 32768.The valid range is 0–61440.
lowest priority value becomes the root bridge. The bridge priority is a multiple of 4096.
If you specify a priority that is not a multiple of 4096, the priority is automatically set to
the next lowest priority that is a multiple of 4096. For example, if the priority is
attempted to be set to any value between 0 and 4095, it will be set to 0. The default
priority is 32768.The valid range is 0–61440.
•
VLAN ID
. The menu contains all VLANs configured on the switch. Select a VLAN to
associate with the MST instance.
3.
Click Add.
4.
View the MST instance information.
For each configured instance, the information described in the following table displays on
the screen.
the screen.
Mode
Specifies the spanning tree operation mode. Different modes are STP, RSTP, and
MSTP
MSTP
.
Fast Link
Indicates whether the port is enabled as an edge port.
Status
The Forwarding State of this port.
Field
Description