Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 관리자 가이드
173
GS752TXS and GS728TXS Smart Switches
Global Trust Mode can be one of the following:
•
Untrusted
. Do not trust any CoS packet marking at ingress.
•
802.1p
. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The
QoS setting lets you map each of the eight priority levels to one of seven internal
hardware priority queues.
hardware priority queues.
•
DSCP
. The six most significant bits of the DiffServ field are called the Differentiated
Services Code Point (DSCP) bits.
4.
From the Interface Trust Mode drop down list, select the trust mode for ingress traffic on the
interface.
Interface Trust Mode can be one of the following:
•
Untrusted
. Do not trust any CoS packet marking at ingress.
•
802.1p
. The eight priority tags that are specified in IEEE 802.1p are p0 to p7. The
QoS setting lets you map each of the eight priority levels to one of seven internal
hardware priority queues.
hardware priority queues.
•
DSCP
. The six most significant bits of the DiffServ field are called the Differentiated
Services Code Point (DSCP) bits.
5.
Click Apply.
CoS Interface Configuration
Use the CoS Interface Configuration screen to apply an interface shaping rate to all
interfaces or to a specific interface.
interfaces or to a specific interface.
To configure CoS settings for an interface:
1.
Select QoS
CoS
> Advanced
CoS Interface Configuration
.
2.
To configure CoS settings for a specific interface, enter the interface and click Go to select
that particular interface.
3.
Alternatively, select the check box associated with each interface for which you want to
configure the CoS settings:
•
To configure CoS settings for a Link Aggregation Group (LAG), click LAGS.
•
To configure CoS settings for both physical ports and LAGs, click ALL.
The same settings will be applied to all selected interfaces.