Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 관리자 가이드

다운로드
페이지 324
206
GS752TXS and GS728TXS Smart Switches 
Access Control
Access control allows you to define a profile configuration and set access rules.
Access Profile Configuration
Use the Access Profile Configuration screen to set up a security access profile.
To configure an access profile:
1.
Select Security Access > Access Control 
 Access Profile Configuration
.
 
2.
Enter the name of the access profile to be added in the Access Profile Name field. Maximum 
length is 32 characters.
3.
Select one of the following options:
Activate Profile
. Activate an access profile.
Deactivate Profile.
 Deactivate an access profile.
Remove Profile.
 Remove an access profile. The access profile should be 
deactivated before removing the access profile.
The Packets Filtered field displays the number of packets filtered. 
The Profile Summary section displays the following:
Rule Type
. This is the action to be performed when the rules selected are matched. 
Service Type
. The policy is restricted by the management chosen from Drop-down 
menu. Possible methods include “HTTP”, “Secure HTTP (SSL)”, and “SNMP”.
Source IP Address
. This is the Source IP Address of the client originating the 
management traffic. Fill in the “Source IP address” in the text box provided.
Mask
. This is the Source IP Address Mask of the client originating the management 
traffic. 
Priority
. Assign a priority to the rule. The rules are validated against the incoming 
management request in the ascending order of their priorities. If a rule matches, 
action is performed and subsequent rules below are ignored. For example, if a Source