Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 관리자 가이드



Select the check box next to the Name field.

Click Delete.

MAC Rules

Use the MAC Rules screen to define rules for MAC-based ACLs. The access list definition 
includes rules that specify whether traffic matching the criteria is forwarded normally or 
discarded. A default 'deny all' rule is the last rule of every list.

To set up a new MAC ACL, use the 

screen.



Select Security 



 > Basic 



.

From the ACL Name list, select the MAC ACL for which to create or update a rule. 

Under Rule ID, specify ID for the rule.

Configure the ACL rule criteria by selecting options or specifying values as follows:

. Specify what action should be taken if a packet matches the rule's criteria:

. Forwards packets that meet the ACL criteria.

. Drops packets that meet the ACL criteria.

. Specifies the hardware egress queue identifier used to handle all 

packets matching this ACL rule. Enter an identifying number from 0–7 in this field. 

. Specifies the specific egress interface where the matching traffic 

stream is forced, bypassing any forwarding decision normally performed by the 
device. 

. Requires a packet to match the criteria of this ACL. Select True or 

False from the drop-down menu. Match Every is exclusive to the other filtering rules, 
so if Match Every is True, the other rules on the screen are not available. 

. Requires a packet’s class of service (CoS) to match the CoS value listed here. 

Enter a CoS value between 0–7 to apply this criteria.

. Requires an Ethernet frame’s destination port MAC address to 

match the address listed here. Enter a MAC address in this field. The valid format is 
xx:xx:xx:xx:xx:xx.