Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 관리자 가이드

EAP Statistics

Use the EAP Statistics screen to display information about EAP packets received on a 
specific port. 



Select Monitoring 



 > EAP Statistics.

 

Select whether to display physical interfaces, link aggregation groups (LAGs), or both by 

clicking one of the following links above the table heading:

(or the unit ID of the switch). Only physical interfaces are displayed. This is the 

default setting.

. Both physical interfaces and link aggregation groups are displayed.

To locate an interface quickly, type the interface number (for example, 1/g5) in the Go To 
Interface field at the top or bottom of the table and click Go.

The following table describes the EAP statistics displayed on the screen.

Ports

The interface which is polled for statistics.

Frames Received

The number of valid EAPOL frames received on the port.

Frames Transmitted

The number of EAPOL frames transmitted through the port.

Start Frames Received

The number of EAPOL Start frames received on the port.

Logoff Frames Received

The number of EAPOL Log off frames that have been received on the 
port.

Last Frame Version

The protocol version number attached to the most recently received 
EAPOL frame.

Last Frame Source

The source MAC Address attached to the most recently received 
EAPOL frame.

Invalid Frames Received

The number of unrecognized EAPOL frames received on this port.

Length Error Frames Received

The number of EAPOL frames with an invalid Packet Body Length 
received on this port.