Netgear GS752TXS - Stackable Smart Gigabit Ethernet Switch 설치 가이드

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste 
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, 
this product should be treated and recycled in accordance with the laws of your jurisdiction 
implementing the WEEE Directive.

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of 
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to 
change without notice. Other brand and product names are registered trademarks or trademarks of their

 

respective holders. © 2011 NETGEAR, Inc. All rights reserved.

The Smart Control Center Utility finds the switch and displays its MAC Address, 
IP Address, and model number. If you cannot configure your switch, verify that 
the cable connections are secure, that the IP address configuration of the PC is 
in the same subnet as the switch, and click the Discover button.

Click to select the line displaying the details of your switch. If there are multiple 

switches in your network, be sure to select the one you want to configure.

Click Web Browser Access to view the switch log in screen.

Enter the default password of password in lower case letters and click Login. 
The switch will display the switch settings main page. Configure the switch for 
your network. Consult the Reference Manual on the Resource CD or the online 
help in the switch for assistance with configuration procedures.

After you log in to the switch, the main Web Browser Access menu displays.

Use the configuration menu options to configure your switch.

Here are some tips for correcting simple problems you may have.

Be sure to power on your PC and switch in the correct sequence. 

Follow this sequence. Turn off the switch and computer. First, turn on the switch 
and wait two minutes. Next, turn on the computer. 

Make sure the Ethernet cables are securely plugged in. 

For each powered on computer connected to the switch with a securely plugged 
in Ethernet cable, the corresponding switch LAN port status light will be lit. 

Make sure the network settings of the computer are correct. 

In most cases, computers should be configured to obtain an IP address via 
DHCP. For help with this, refer to the Reference Manual; a link to the online 
Reference Manual is on the Resource CD.

If your network uses static IP addresses, be sure the switch and computer are 
configured with valid IP addresses. 

Thank you for selecting NETGEAR products. 

After installing your device, locate the serial number on the label of your product and 
use it to register your product at 

Registration is 

required before you can use the telephone support service. Registration via our 
website is strongly recommended.

Go to 

for product updates, documentation, and support

For additional information about setting up, configuring, and using your GS752TXS, 
see the User Manual

For complete DoC please visit the NETGEAR EU Declarations of Conformity 
website at: 

For GNU General Public License (GPL) related information, please visit 

DO NOT stack equipment, or place equipment in tight spaces, or in drawers. Be 
sure your equipment is surrounded by at least 2” of air space.