Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 하드웨어 매뉴얼
Physical Description
17
S3300 Smart Switch
LED Designations
This section describes the LED designations of models S3300-28X and S3300-28X-PoE+.
Port LEDs
The following table describes the RJ-45 and SFP+ port LED designations.
Table 3. Port LEDs models S3300-28X and S3300-28X-PoE+
LED
Designation
Both Models
Left LED
RJ45 SPD Mode LED
(Link, Speed, Activity) for
copper ports 1 to 24
(Link, Speed, Activity) for
copper ports 1 to 24
•
Off.
No link is established.
•
Solid green .
A valid 1000 Mbps link is established.
•
Blinking green .
The port is transmitting or receiving packets at 1000
Mbps.
•
Solid yellow .
A valid 10/100 Mbps link is established.
•
Blinking yellow .
The port is transmitting or receiving packets at
10/100
Mbps.
Link/ACT Mode LED for
10G copper ports
26 and 26
10G copper ports
26 and 26
•
Off .
No link is established on the copper port.
•
Solid green .
The copper port established a valid 10 Gbps link.
•
Blinking green
.
The copper port is transmitting or receiving packets at
10
Gbps.
•
Solid yellow .
The copper port established a valid 1 Gbps or 100 Mbps link.
•
Blinking yellow .
The copper port is transmitting or receiving packets at 1 Gbps
or 100
Mbps.
Link/ACT Mode LED for
SFP+ fiber ports
27 and 28
SFP+ fiber ports
27 and 28
•
Off .
No SFP+ module link is established on the fiber port.
•
Solid green .
The fiber port established a valid 10 Gbps link.
•
Blinking green
.
The fiber port is transmitting or receiving packets at 10
Gbps.
•
Solid yellow .
The fiber port established a valid 1 Gbps link.
•
Blinking yellow .
The fiber port is transmitting or receiving packets at 1 Gbps.
PoE Model Only
Right LED
PoE Mode LED for
copper ports 1 to 24
copper ports 1 to 24
•
Off.
PoE mode is off.
•
Solid green . PoE mode is on.
•
Solid yellow .
A PoE fault occurred.
Note:
For the non-PoE model, the right LAN LED is non-functioning by design.