Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 관리자 가이드
Configuring Switching
120
S3300 Smart Switch
VLAN Membership Configuration
Use this screen to configure VLAN port membership for a particular VLAN. You can select
the Group operation through this screen.
the Group operation through this screen.
To configure VLAN membership for individual ports and LAGs:
1.
Select Switching
VLAN
Advanced
VLAN Membership.
2.
From the VLAN ID list, select the VLAN to which you want to add ports.
3.
Click the Unit number icon below the VLAN Type field to display the physical ports on the
switch.
switch.
4.
Click the Unit number icon to display the LAGs on the switch.
5.
To select the ports or LAGs to add to the VLAN, click the square below each port or LAG.
You can add each interface as a tagged (T) or untagged (U) VLAN member. A blank
square means that the port is not a member of the VLAN.
square means that the port is not a member of the VLAN.
•
Tagged. Frames transmitted from this port are tagged with the port VLAN ID.
•
Untagged. Frames transmitted from this port are untagged. Each port can be an
untagged member of only one VLAN. By default, all ports are an untagged member of
VLAN 1.
untagged member of only one VLAN. By default, all ports are an untagged member of
VLAN 1.
In the following figure, ports 8, 10, and 12 and LAG 1 are being added as tagged
members to VLAN 1.
members to VLAN 1.
Figure 45. VLAN Membership
6.
Click the Apply button.