Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 관리자 가이드
Getting Started
16
S3300 Smart Switch
9.
Type your password to continue with the configuration change.
Tip:
You must enter the current password every time you use the Smart
Control Center to update the switch setting. The default password is
password.
Control Center to update the switch setting. The default password is
password.
10.
Click the Apply button to configure the switch with the network settings.
Ensure that your computer and the switch are in the same subnet. Make a note of these
settings for later use.
settings for later use.
Configure the Network Settings on the Administrative
System
System
If you choose not to use the Smart Control Center to configure the network information on the
switch, you can connect directly to the switch from an administrative system, such as a
computer or laptop. The IP address of the administrative system must be in the same subnet
as the default IP address on the switch. For most networks, this means you must change the
IP address of the administrative system to be on the same subnet as the default IP address
of the switch (192.168.0.239).
switch, you can connect directly to the switch from an administrative system, such as a
computer or laptop. The IP address of the administrative system must be in the same subnet
as the default IP address on the switch. For most networks, this means you must change the
IP address of the administrative system to be on the same subnet as the default IP address
of the switch (192.168.0.239).
The method to change the IP address on an administrative system varies depending on the
operating system version. You need Windows Administrator privileges to change these
settings. The following procedures show how to change the static IP address on a computer
running a Microsoft Windows 7.
operating system version. You need Windows Administrator privileges to change these
settings. The following procedures show how to change the static IP address on a computer
running a Microsoft Windows 7.
To modify the network settings on your administrative system:
1.
Open the Control Panel and click the Network and Sharing Center option.
2.
Click the Local Area Connection link.
Figure 4. Local Area Connection
3.
In the Local Area Connection Status window, click the Properties button.