Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 관리자 가이드

Use the MVR Group Configuration screen to create and manage MVR groups on the switch. 
In this example, five MVR groups are created. To create multiple MVR groups in the same 
step, the groups must have contiguous IP addresses, such as 239.1.1.1, 239.1.1.2, 
239.1.1.3, and so on.



Select Switching > MVR Configuration > Advanced > MVR Group Configuration.

In the MVR Group IP field, specify the lowest multicast IP group address in the block of 
MVR group addresses.

In the Count field, specify the number of addresses in the contiguous block.

In this example, the count is 5.

Click the Add button to add the five new MVR groups. 

The following figure shows the five MVR groups that are created in this procedure.

The following table describes the status information that is displayed for each MVR group.

Status 

The status of the MVR group, which is either active or inactive. 

Members 

The list of ports that participate in the MVR group.