Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 관리자 가이드

To access the switch management interface, use one of the following methods:

From the Smart Control Center, select the switch and click the Web Browser Access 
button. For more information, see the Smart Control Center User Guide at 

Open a web browser and enter the IP address of the switch in the address field.

You must be able to ping the IP address of the switch web management interface from your 
administrative system for web access to be available. If you used the Smart Control Center to 
set up the IP address and subnet mask, either with or without a DHCP server, use that IP 
address in the address field of your web browser. If you did not change the IP address of the 
switch from the default value, enter 192.168.0.239 in the address field. 

Clicking the Web Browser Access button on the Smart Control Center or accessing the 
switch directly from your web browser displays the Login screen.

The switch software includes a set of comprehensive management functions for configuring 
and monitoring the system by using one of the following methods: 

Web user interface

Simple Network Management Protocol (SNMP)

Each of the standards-based management methods allows you to configure and monitor the 
components of the switch software. The method you use to manage the system depends on 
your network size and requirements, and on your preference.

This manual describes how to use the web interface to manage and monitor the system. 

To access the switch by using a web browser, the browser must meet the following software 
requirements: 

HTML version 4.0, or later 

HTTP version 1.1, or later 

Java Runtime Environment 1.6 or later

The following browsers were tested and support the web browser–based management 
interface. Later browser versions might function fine but were not tested. The supported web 
browsers include the following:

Microsoft Internet Explorer (IE) versions 9-11