Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 관리자 가이드

Use the Service Configuration screen to activate a policy on an interface. 



Select QoS 







 Service Configuration.

Select the interfaces to attach to the policy. 

For information about how to select and configure one or more ports and LAGs, see 

30From the Policy In Name list, select the policy to 

attach to the interface.

Click the Apply button. 

Click the Cancel button to cancel the configuration on the screen, and reset the data on the 
screen to the latest value of the switch.



Select the interface(s) on which the policy is to be removed.

From the Policy In Name list, select None.

Click the Apply button. 

Click the Cancel button to cancel the configuration on the screen, and reset the data on the 
screen to the latest value of the switch.

Use the Service Statistics screen to display service-level statistical information about all 
interfaces that have DiffServ policies attached.



Select QoS 



 DiffServ > Advanced 



 Service Statistics. 

The following table describes the information available on the Service Statistics screen.

Interface

The interface for which service statistics are to display. 

Direction

The direction of packets for which service statistics display, which is always In.

Policy Name

The policy associated with the selected interface.

Operational Status The operational status of this service interface, which is either Up or Down.

Discarded Packets The total number of packets discarded for all class instances in this service policy for 

any reason due to DiffServ treatment. This is the overall count per-interface, 
per-direction.

Member Classes

Selects the member class for which octet statistics are to display.