Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 관리자 가이드
Managing Device Security
230
S3300 Smart Switch
Access Control
Access control allows you to configure a profile and set access rules.
Access Profile Configuration
Use the Access Profile Configuration screen to set up a security access profile.
To configure an access profile:
1.
Select Security > Access > Access Control
Access Profile Configuration.
2.
In the Access Profile Name field, specify the name of the access profile to be added.
3.
Select one of the following options:
•
Activate Profile. Activate an access profile.
•
Deactivate Profile. Deactivate an access profile.
•
Remove Profile. Remove an access profile. The access profile should be
deactivated before removing the access profile.
deactivated before removing the access profile.
4.
Click the Apply button.
The following table describes the access profile status information and the profile summary
information the screen displays.
information the screen displays.
Table 82. Access Profile Configuration
Field
Description
Packets Filtered
The number of packets filtered.
Profile Summary
Rule Type
The action to be performed when the rules selected are matched.
Service Type
The policy is restricted by the management chosen from the list. Possible
methods include HTTP, Secure HTTP (SSL), and SNMP.
methods include HTTP, Secure HTTP (SSL), and SNMP.
Source IP Address
The Source IP Address of the client originating the management traffic.
Mask
The Source IP Address Mask of the client originating the management traffic.
Priority
The rule priority value. The rules are validated against the incoming management
request in the ascending order of their priorities. If a rule matches, action is
performed and subsequent rules below are ignored. For example, if a Source IP
10.10.10.10 is configured with priority 1 to permit, and Source IP 10.10.10.10 is
configured with priority 2 to Deny, then access is permitted if the profile is active,
and the second rule is ignored.
request in the ascending order of their priorities. If a rule matches, action is
performed and subsequent rules below are ignored. For example, if a Source IP
10.10.10.10 is configured with priority 1 to permit, and Source IP 10.10.10.10 is
configured with priority 2 to Deny, then access is permitted if the profile is active,
and the second rule is ignored.
Access Rule Configuration
Use the Access Rule Configuration screen to add security access rules.