Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 관리자 가이드
Managing Device Security
265
S3300 Smart Switch
•
To add the selected ACL to a port or LAG, click the box directly below the port or LAG
number so that a check mark displays in the box.
number so that a check mark displays in the box.
•
To remove the selected ACL from a port or LAG, click the box directly below the port
or LAG number to clear the selection. A check mark in the box indicates that the ACL
is applied to the interface.
or LAG number to clear the selection. A check mark in the box indicates that the ACL
is applied to the interface.
5.
Click the Apply button.
IP Binding Table
Use the IP Binding Table screen to view or delete the IP ACL bindings.
The following table describes the information displayed in the IP binding table.
Table 91. IP binding table information
Field
Description
Interface
The interface to which the IP ACL is bound.
Direction
Specifies the packet filtering direction for ACL. The only valid direction is Inbound,
which means the IP ACL rules are applied to traffic entering the port.
which means the IP ACL rules are applied to traffic entering the port.
ACL Type
The type of ACL assigned to selected interface and direction.
ACL ID
The ACL Number identifying the ACL assigned to selected interface and direction.
Seq No.
The Sequence Number signifying the order of specified ACL relative to other ACLs
assigned to selected interface and direction.
assigned to selected interface and direction.
To delete an IP ACL binding:
1.
Select Security
ACL > Advanced
Binding Table.
2.
Select the check box associated with the ACL-to-interface binding to remove.
3.
Click the Delete button.
VLAN Binding Table
Use the VLAN binding table screen to associate an ACL with a VLAN. When an ACL is
associated with a VLAN, it is applied to all interfaces that are members of the VLAN.
associated with a VLAN, it is applied to all interfaces that are members of the VLAN.
To configure an ACL-to-VLAN binding:
1.
Select Security
ACL > Advanced
VLAN Binding Table.
2.
In the VLAN ID field, specify a VLAN ID for ACL mapping.
3.
In the Direction field, select In Bound.
The IP ACL rules are applied to traffic entering the port.
4.
(Optionally) In the Sequence Number field, specify the sequence number of the access lists.
This sequence number indicates the order of this access list relative to other access lists
already assigned to this VLAN and direction. A lower number indicates higher
already assigned to this VLAN and direction. A lower number indicates higher