Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series 관리자 가이드

You can also type the interface number (for example, g7) in the Go To Interface field at 
the top or bottom of the table and click the Go button.

Click the Clear button.

The Port Detailed Statistics screen displays a variety of per-port traffic statistics.



Select Monitoring 



 Ports > Port Detailed Statistics. 

From the Interface list, select the interface with the statistics to view. 

From the MST list, select the MST ID associated with the interface (if available).

The following table describes the detailed port information displayed on the screen. 

ifIndex

This field indicates the ifIndex of the interface table entry associated with 
this port on an adapter.

Port Type

For most ports this field is blank. Otherwise the possible values are:

Mirrored

. 

Indicates that the port has been configured as a monitoring 

port and is the source port in a port mirroring session. For additional 
information about port monitoring and probe ports, see 

Probe

. 

Indicates that the port has been configured as a monitoring 

port and is the destination port in a port mirroring session. For 
additional information about port monitoring and probe ports, see 

285.

Port Channel.

 

Indicates that the port has been configured as a 

member of a port-channel, which is also known as a Link 

Aggregation Group (LAG).

Port Channel ID

If the port is a member of a port channel, the port channel's interface ID 
and name are shown. Otherwise, Disable is shown.

Port Role

Each MST Bridge Port that is enabled is assigned a Port Role for each 
spanning tree. The port role will be one of the following values: Root Port, 
Designated Port, Alternate Port, Backup Port, Master Port, or Disabled 
Port.

STP Mode

The Spanning Tree Protocol (STP) Administrative Mode for the port or 
LAG. The possible values for this field are:

Enable

. 

STP is administratively enabled on this port.

Disable

. 

STP is administratively disabled on this port.